tap — Tapping cycleMachining cycles
Rigid-tap a thread (synchronised feed/spindle).
tap at (x,y)… depth <d> pitch <p>Equivalents: Fanuc G84 · Siemens CYCLE84
| Parameter | Type | Default | |
|---|---|---|---|
at | mm | — | hole positions |
depth | mm | — | thread depth |
pitch | mm/rev | — | thread pitch |
Rigid tapping: the feed is locked to the spindle (`feed = pitch × rpm`) and the spindle reverses to retract. The active spindle speed/direction drives it.
units mm
tool 9
spindle 800
tap at (0,0) depth 15 pitch 1.0